A

  • Adeniji, J.O. Global Solar Radiation, Sunshine-hour Distribution, and Clearness Index: A Case Study of Sub-Sahara Region in Nigeria [Volume 1, Issue 2, 2020, Pages 161-174]

  • Adeniji, N.O. Global Solar Radiation, Sunshine-hour Distribution, and Clearness Index: A Case Study of Sub-Sahara Region in Nigeria [Volume 1, Issue 2, 2020, Pages 161-174]

  • Ahmadi, A. Benefits and Limitations of Waste-to-Energy Conversion in Iran [Volume 1, Issue 1, 2020, Pages 27-45]

  • Ahmadi, A. Development of a Simple Model to Estimate Entropy Generation of Earth [Volume 1, Issue 2, 2020, Pages 135-141]

  • Ahmadi, N. Numerical Investigation of Gas Channel Geometry of Proton Exchange Membrane Fuel Cell [Volume 1, Issue 1, 2020, Pages 93-114]

  • Alayi, R. Generation Management Analysis of a Stand-alone Photovoltaic System with Battery [Volume 1, Issue 2, 2020, Pages 205-209]

  • Alayi, R. Modeling and Technical Analysis of Solar Tracking System to Find Optimal Angle for Maximum Power Generation using MOPSO Algorithm [Volume 1, Issue 2, 2020, Pages 211-222]

  • Al-Dousari, F. An Experimental Study on Producing a Sustainable Diesel-like Fuel from Waste Engine Oil [Volume 1, Issue 2, 2020, Pages 143-150]

  • Alhuyi Nazari, M. Applications of multi-Criteria Decision-Making (MCDM) Methods in Renewable Energy Development: A Review [Volume 1, Issue 1, 2020, Pages 47-54]

  • Alkhatib, F. An Experimental Study on Producing a Sustainable Diesel-like Fuel from Waste Engine Oil [Volume 1, Issue 2, 2020, Pages 143-150]

  • Alkhazzam, A, An Experimental Study on Producing a Sustainable Diesel-like Fuel from Waste Engine Oil [Volume 1, Issue 2, 2020, Pages 143-150]

  • Al-Saad, O. An Experimental Study on Producing a Sustainable Diesel-like Fuel from Waste Engine Oil [Volume 1, Issue 2, 2020, Pages 143-150]

  • Amirrud, M.R. Sensitivity and Uncertainty Analysis of Economic Feasibility of Establishing Wind Power Plant in Kerman, Iran [Volume 1, Issue 2, 2020, Pages 247-260]

B

  • Bani-Hani, E. Thermal Analysis of Organic Rankine Cycle Using Different Organic Fluids [Volume 1, Issue 1, 2020, Pages 115-121]

  • Bani-Hani, E. An Experimental Study on Producing a Sustainable Diesel-like Fuel from Waste Engine Oil [Volume 1, Issue 2, 2020, Pages 143-150]

  • Behura, A.K. An Exergy Analysis of a 250 MW Thermal Power Plant [Volume 1, Issue 2, 2020, Pages 197-204]

  • Beigzadeh, M. Modeling Heat and Power Generation for Green Buildings based on Solid Oxide Fuel Cells and Renewable Fuels (Biogas) [Volume 1, Issue 1, 2020, Pages 55-63]

  • Berahmandpour, H. A New Method for Real Time Economic Dispatch Solution Including Wind Farms [Volume 1, Issue 2, 2020, Pages 151-160]

  • Bidi, M. Thermodynamic and Exergy Analyses of a Novel Solar-Powered CO2 Transcritical Power Cycle with Recovery of Cryogenic LNG Using Stirling Engines [Volume 1, Issue 2, 2020, Pages 175-185]

C

  • Cheraghi, R. Energy and Exergy Assessment of a New Heat Recovery Method in a Cement Factory [Volume 1, Issue 1, 2020, Pages 123-134]

D

  • Delbari, Seyed H. Modeling and Technical Analysis of Solar Tracking System to Find Optimal Angle for Maximum Power Generation using MOPSO Algorithm [Volume 1, Issue 2, 2020, Pages 211-222]

E

  • Ehyaei, M. A. Benefits and Limitations of Waste-to-Energy Conversion in Iran [Volume 1, Issue 1, 2020, Pages 27-45]

  • Ehyaei, M. A. Development of a Simple Model to Estimate Entropy Generation of Earth [Volume 1, Issue 2, 2020, Pages 135-141]

  • EL Haj Assad, M. Thermal Analysis of Organic Rankine Cycle Using Different Organic Fluids [Volume 1, Issue 1, 2020, Pages 115-121]

  • Eskandary Nasrabad, Alireza Turbocharged Diesel Engine Power Production Enhancement: Proposing a Novel Thermal-Driven Supercharging System based on Kalina Cycle [Volume 1, Issue 2, 2020, Pages 223-234]

  • Esmaeilion, A. Benefits and Limitations of Waste-to-Energy Conversion in Iran [Volume 1, Issue 1, 2020, Pages 27-45]

  • Esmaeilion, F. Benefits and Limitations of Waste-to-Energy Conversion in Iran [Volume 1, Issue 1, 2020, Pages 27-45]

F

  • Farzaneh-Gord, M. Predicting Optimum Spark Timing of a Biofuel Four Stroke Spark Ignition Combustion Engine [Volume 1, Issue 1, 2020, Pages 75-83]

  • Fazlikhani, M. Thermodynamic and Exergy Analyses of a Novel Solar-Powered CO2 Transcritical Power Cycle with Recovery of Cryogenic LNG Using Stirling Engines [Volume 1, Issue 2, 2020, Pages 175-185]

G

  • Garoosi, S. Role of Energy Supply and demand Fluctuations in Macroeconomic Development of Iran [Volume 1, Issue 1, 2020, Pages 85-92]

  • Ghasempour, R. Energy and Exergy Assessment of a New Heat Recovery Method in a Cement Factory [Volume 1, Issue 1, 2020, Pages 123-134]

  • Ghassemieh, Mehdi Implementation of a Zero-energy Building Scheme for a Hot and Dry Climate Region in Iran (a Case Study, Yazd) [Volume 1, Issue 1, 2020, Pages 65-74]

  • Ghazvini, M. Thermo-Economic Assessment and Optimization of Actual Heat Engine Performance by Implemention of NSGA II [Volume 1, Issue 2, 2020, Pages 235-245]

  • Gorla, RSR Use of Rayleigh Distribution Method for Assessment of Wind Energy Output in Cleveland–Ohio [Volume 1, Issue 1, 2020, Pages 11-18]

H

  • Hajializadeh, H. Predicting Optimum Spark Timing of a Biofuel Four Stroke Spark Ignition Combustion Engine [Volume 1, Issue 1, 2020, Pages 75-83]

  • Harasii, H. Modeling and Technical Analysis of Solar Tracking System to Find Optimal Angle for Maximum Power Generation using MOPSO Algorithm [Volume 1, Issue 2, 2020, Pages 211-222]

I

  • Isvand, H. Applications of multi-Criteria Decision-Making (MCDM) Methods in Renewable Energy Development: A Review [Volume 1, Issue 1, 2020, Pages 47-54]

J

  • Jahanbin, F. Generation Management Analysis of a Stand-alone Photovoltaic System with Battery [Volume 1, Issue 2, 2020, Pages 205-209]

  • Jain, A. Experimental Investigation on a Ducted Savonius Vertical Axis Wind Turbine and its Performance Comparison with and without Endplates [Volume 1, Issue 1, 2020, Pages 1-9]

  • Jalili, M. Energy and Exergy Assessment of a New Heat Recovery Method in a Cement Factory [Volume 1, Issue 1, 2020, Pages 123-134]

  • Javaherbakhsh, A.R. Modeling and Technical Analysis of Solar Tracking System to Find Optimal Angle for Maximum Power Generation using MOPSO Algorithm [Volume 1, Issue 2, 2020, Pages 211-222]

K

  • Kaushal, R. Heat Transfer Enhancement Using Augmented Tubes for Desalination Using Fuzzy-TOPSIS Approach [Volume 1, Issue 1, 2020, Pages 19-26]

  • Khalilarya, Sh. Numerical Investigation of Gas Channel Geometry of Proton Exchange Membrane Fuel Cell [Volume 1, Issue 1, 2020, Pages 93-114]

  • Khanna, B. Experimental Investigation on a Ducted Savonius Vertical Axis Wind Turbine and its Performance Comparison with and without Endplates [Volume 1, Issue 1, 2020, Pages 1-9]

  • Kouhsari, Sh. A New Method for Real Time Economic Dispatch Solution Including Wind Farms [Volume 1, Issue 2, 2020, Pages 151-160]

  • Kumar, A. An Exergy Analysis of a 250 MW Thermal Power Plant [Volume 1, Issue 2, 2020, Pages 197-204]

  • Kumar, R. Heat Transfer Enhancement Using Augmented Tubes for Desalination Using Fuzzy-TOPSIS Approach [Volume 1, Issue 1, 2020, Pages 19-26]

  • Kumar, R. Implementation of a Zero-energy Building Scheme for a Hot and Dry Climate Region in Iran (a Case Study, Yazd) [Volume 1, Issue 1, 2020, Pages 65-74]

L

  • Lak Kamari, M. Applications of multi-Criteria Decision-Making (MCDM) Methods in Renewable Energy Development: A Review [Volume 1, Issue 1, 2020, Pages 47-54]

M

  • Mirlohi, Seyyed M. Implementation of a Zero-energy Building Scheme for a Hot and Dry Climate Region in Iran (a Case Study, Yazd) [Volume 1, Issue 1, 2020, Pages 65-74]

  • Mirzaee, I. Numerical Investigation of Gas Channel Geometry of Proton Exchange Membrane Fuel Cell [Volume 1, Issue 1, 2020, Pages 93-114]

  • Mishra, N. Experimental Investigation on a Ducted Savonius Vertical Axis Wind Turbine and its Performance Comparison with and without Endplates [Volume 1, Issue 1, 2020, Pages 1-9]

  • Mitra, S. Experimental Investigation on a Ducted Savonius Vertical Axis Wind Turbine and its Performance Comparison with and without Endplates [Volume 1, Issue 1, 2020, Pages 1-9]

  • M. N, Ervina Efzan A Case Study on Effect of Inclination Angle on Performance of Photovoltaic Solar Thermal Collector in Forced Fluid Mode [Volume 1, Issue 2, 2020, Pages 187-196]

  • Mohamed, H. Thermal Analysis of Organic Rankine Cycle Using Different Organic Fluids [Volume 1, Issue 1, 2020, Pages 115-121]

  • Mortazavi, Seyed M. Role of Energy Supply and demand Fluctuations in Macroeconomic Development of Iran [Volume 1, Issue 1, 2020, Pages 85-92]

  • M. Sultan, Sakhr A Case Study on Effect of Inclination Angle on Performance of Photovoltaic Solar Thermal Collector in Forced Fluid Mode [Volume 1, Issue 2, 2020, Pages 187-196]

N

  • Naeimi, A. Thermodynamic and Exergy Analyses of a Novel Solar-Powered CO2 Transcritical Power Cycle with Recovery of Cryogenic LNG Using Stirling Engines [Volume 1, Issue 2, 2020, Pages 175-185]

  • Nair, A. Experimental Investigation on a Ducted Savonius Vertical Axis Wind Turbine and its Performance Comparison with and without Endplates [Volume 1, Issue 1, 2020, Pages 1-9]

  • Naseri, A. Thermodynamic and Exergy Analyses of a Novel Solar-Powered CO2 Transcritical Power Cycle with Recovery of Cryogenic LNG Using Stirling Engines [Volume 1, Issue 2, 2020, Pages 175-185]

  • Naserian, M. M. Turbocharged Diesel Engine Power Production Enhancement: Proposing a Novel Thermal-Driven Supercharging System based on Kalina Cycle [Volume 1, Issue 2, 2020, Pages 223-234]

  • Nikam, K.C. An Exergy Analysis of a 250 MW Thermal Power Plant [Volume 1, Issue 2, 2020, Pages 197-204]

O

  • Ojeikere, O. Global Solar Radiation, Sunshine-hour Distribution, and Clearness Index: A Case Study of Sub-Sahara Region in Nigeria [Volume 1, Issue 2, 2020, Pages 161-174]

P

  • Pallikonda, M. K. Use of Rayleigh Distribution Method for Assessment of Wind Energy Output in Cleveland–Ohio [Volume 1, Issue 1, 2020, Pages 11-18]

  • Pourderogar, H. Modeling and Technical Analysis of Solar Tracking System to Find Optimal Angle for Maximum Power Generation using MOPSO Algorithm [Volume 1, Issue 2, 2020, Pages 211-222]

  • Pourfayaz, F. Modeling Heat and Power Generation for Green Buildings based on Solid Oxide Fuel Cells and Renewable Fuels (Biogas) [Volume 1, Issue 1, 2020, Pages 55-63]

  • Pourfayaz, F. Thermo-Economic Assessment and Optimization of Actual Heat Engine Performance by Implemention of NSGA II [Volume 1, Issue 2, 2020, Pages 235-245]

  • Pourkiaei, S.M. Modeling Heat and Power Generation for Green Buildings based on Solid Oxide Fuel Cells and Renewable Fuels (Biogas) [Volume 1, Issue 1, 2020, Pages 55-63]

  • Pourkiaei, S.M. Thermo-Economic Assessment and Optimization of Actual Heat Engine Performance by Implemention of NSGA II [Volume 1, Issue 2, 2020, Pages 235-245]

R

  • Rastegar, H. A New Method for Real Time Economic Dispatch Solution Including Wind Farms [Volume 1, Issue 2, 2020, Pages 151-160]

  • Reisi, M. M. Energy and Exergy Assessment of a New Heat Recovery Method in a Cement Factory [Volume 1, Issue 1, 2020, Pages 123-134]

S

  • Sadeghi, Haleh Numerical Investigation of Gas Channel Geometry of Proton Exchange Membrane Fuel Cell [Volume 1, Issue 1, 2020, Pages 93-114]

  • Sadeghzadeh, M. Implementation of a Zero-energy Building Scheme for a Hot and Dry Climate Region in Iran (a Case Study, Yazd) [Volume 1, Issue 1, 2020, Pages 65-74]

  • Sadeghzadeh, M. Thermodynamic and Exergy Analyses of a Novel Solar-Powered CO2 Transcritical Power Cycle with Recovery of Cryogenic LNG Using Stirling Engines [Volume 1, Issue 2, 2020, Pages 175-185]

  • Sadeghzadeh, M. Modeling and Technical Analysis of Solar Tracking System to Find Optimal Angle for Maximum Power Generation using MOPSO Algorithm [Volume 1, Issue 2, 2020, Pages 211-222]

  • Salek, F. Turbocharged Diesel Engine Power Production Enhancement: Proposing a Novel Thermal-Driven Supercharging System based on Kalina Cycle [Volume 1, Issue 2, 2020, Pages 223-234]

  • Sarabandi, A. H. Predicting Optimum Spark Timing of a Biofuel Four Stroke Spark Ignition Combustion Engine [Volume 1, Issue 1, 2020, Pages 75-83]

  • Sedaghat, A. An Experimental Study on Producing a Sustainable Diesel-like Fuel from Waste Engine Oil [Volume 1, Issue 2, 2020, Pages 143-150]

  • Shahin, M. Sensitivity and Uncertainty Analysis of Economic Feasibility of Establishing Wind Power Plant in Kerman, Iran [Volume 1, Issue 2, 2020, Pages 247-260]

  • Silveira, J. L. Benefits and Limitations of Waste-to-Energy Conversion in Iran [Volume 1, Issue 1, 2020, Pages 27-45]

T

  • Tabatabaei, Seyyed H. Thermodynamic and Exergy Analyses of a Novel Solar-Powered CO2 Transcritical Power Cycle with Recovery of Cryogenic LNG Using Stirling Engines [Volume 1, Issue 2, 2020, Pages 175-185]

  • Tso, C. P. A Case Study on Effect of Inclination Angle on Performance of Photovoltaic Solar Thermal Collector in Forced Fluid Mode [Volume 1, Issue 2, 2020, Pages 187-196]

W

  • Walunj, G. Use of Rayleigh Distribution Method for Assessment of Wind Energy Output in Cleveland–Ohio [Volume 1, Issue 1, 2020, Pages 11-18]