Sh. Sham Dol; S. Shahid Pervaiz; M. Uzair; Sh. Khalid Bashir; M. Mustafa Elzughbi
Abstract
The research aims at designing a solar endurance glider for an increased flight time. The constraints for design include reduction in weight compared to a typical glider and improving its aerodynamic performance by application of vortex generators on its wingspan. The design of each component was performed ...
Read More
The research aims at designing a solar endurance glider for an increased flight time. The constraints for design include reduction in weight compared to a typical glider and improving its aerodynamic performance by application of vortex generators on its wingspan. The design of each component was performed through various stages of similitude cases; furthermore, the components, such as solar panels and vortex generators were selected based on a decision matrix design process. This research utilized ANSYS 18.1 K-Omega SST turbulence simulation techniques to successfully simulate the glider at different speeds along with various angle of attacks for aerodynamics optimization. The results show an improvement in lift force from 160 N to 192 N once the vortex generators were installed. 16 solar cells are installed on the glider’s wings providing 57.6 Watts of power. This study faced a limitation on the physical testing using a wind tunnel for validation; therefore, the team relied on CFD simulations verification from published data. This report details the concept of boundary layer, design process, glider simulation as well as glider configuration, such as the wingspan and total length. The glider should be able to maintain a flight time of at least 6 hours with vortex generators and solar panels.
A. Beiranvand; M.A. Ehyaei; A. Ahmadi; Jose Luz Silvaria
Abstract
The high potential of solar energy in Iran, as well as the problem of air pollution, makes it increasingly inevitable that solar energy is used. In this study, the solar-powered Organic Rankine cycle (ORC) has been investigated. The solar-type collector is a flat plate collector. The energy, exergy, ...
Read More
The high potential of solar energy in Iran, as well as the problem of air pollution, makes it increasingly inevitable that solar energy is used. In this study, the solar-powered Organic Rankine cycle (ORC) has been investigated. The solar-type collector is a flat plate collector. The energy, exergy, and economic analyses of the hybrid system with the MOPSO algorithm have been carried out for Tehran., the capital of Iran. The working fluid of the solar collector has assumed water and the working fluid of the ORC cycle is R123. The MATLAB software is used for simulation and to compute the R123 fluid properties, the Refprop software is used. The exergy investigation shows that the most exergy destruction is related to the evaporator. Two objective functions consist of exergy efficiency and the price of electricity are considered. The decision variables for this optimization are considered as; the number of solar collector panels, the pump, and turbine isentropic efficiencies, and the pressure of condenser and evaporator. The Pareto diagram shows that the exergy efficiency of the system can vary as 7.5 % to 10.5 %, as well as the price of produced electricity can vary from 0.2 to 0.26 to $/kWh.